Quick Takeaways
- The Hongqi HS6 PHEV strengthens FAW Hongqi’s position in China’s premium plug-in hybrid SUV segment with long electric range and rapid charging.
- The model combines high-performance hybrid powertrain architecture with advanced software-driven cockpit and assisted driving features.
On December 16, the Hongqi HS6 PHEV entered the Chinese market as a new large five-seat flagship SUV, strengthening FAW Hongqi’s push in the premium plug-in hybrid segment. The launch highlights the brand’s focus on combining electrified performance, extended driving range, and advanced in-vehicle electronics for demanding urban and highway use cases.
Hongqi HS6 PHEV pricing and variants overview
The Hongqi HS6 PHEV is offered in three configurations, including one electric all-wheel-drive option and two front-wheel-drive variants. Prices range from CNY 178,800 to CNY 228,800, positioning the model competitively within China’s rapidly expanding premium PHEV SUV category.
Key configuration highlights include:
Hongqi HS6 PHEV dimensions and platform architecture
Built on the Honghu hybrid platform, the Hongqi HS6 PHEV measures 4,925 mm in length, 1,970 mm in width, and 1,740 mm in height, with a wheelbase of 2,925 mm. These dimensions provide a spacious cabin layout while supporting battery integration and high-voltage electrical architecture without compromising interior comfort.
Hongqi HS6 PHEV powertrain and performance
At the core of the Hongqi HS6 PHEV is a 1.5T dedicated hybrid engine delivering 110 kW and 225 Nm, paired with a permanent magnet synchronous motor rated at 168 kW and 340 Nm. Depending on the drivetrain configuration, the SUV accelerates from 0 to 100 km/h in as little as 4.8 seconds, with a top speed of 205 km/h.
Performance and efficiency highlights include:
Hongqi HS6 PHEV battery, range, and charging capability
The Hongqi HS6 PHEV is equipped with either a 23 kWh or 40 kWh 4C lithium-iron phosphate battery. This setup enables a CLTC-rated electric-only range of up to 248 km and a combined driving range reaching as high as 1,650 km. Under low battery conditions, fuel consumption remains between 5.1 and 5.9 L/100 km.
Charging performance is a key differentiator, with fast charging allowing the battery to replenish from 20% to 80% state of charge in approximately 15 minutes, supporting daily usability and long-distance travel.
Hongqi HS6 PHEV cockpit electronics and assisted driving features
The interior of the Hongqi HS6 PHEV emphasizes digital integration and driver assistance. The cabin features an 8.88-inch digital instrument cluster and a 15.6-inch integrated display for the center console and front passenger. Select variants include the Hongqi HMI 5.0 system powered by a Qualcomm Snapdragon 8295P chipset.
Technology highlights include:
With its blend of extended electric capability, rapid charging, and high-end software-defined features, the Hongqi HS6 PHEV reflects FAW Hongqi’s strategy to elevate its flagship SUV lineup while addressing evolving expectations in China’s premium electrified vehicle market.
Hongqi HS6 PHEV pricing and variants overview
The Hongqi HS6 PHEV is offered in three configurations, including one electric all-wheel-drive option and two front-wheel-drive variants. Prices range from CNY 178,800 to CNY 228,800, positioning the model competitively within China’s rapidly expanding premium PHEV SUV category.
Key configuration highlights include:
- Front-wheel-drive and electric 4WD layouts
- Multiple battery capacity options
- Variant-specific performance tuning and technology features
Hongqi HS6 PHEV dimensions and platform architecture
Built on the Honghu hybrid platform, the Hongqi HS6 PHEV measures 4,925 mm in length, 1,970 mm in width, and 1,740 mm in height, with a wheelbase of 2,925 mm. These dimensions provide a spacious cabin layout while supporting battery integration and high-voltage electrical architecture without compromising interior comfort.
Hongqi HS6 PHEV powertrain and performance
At the core of the Hongqi HS6 PHEV is a 1.5T dedicated hybrid engine delivering 110 kW and 225 Nm, paired with a permanent magnet synchronous motor rated at 168 kW and 340 Nm. Depending on the drivetrain configuration, the SUV accelerates from 0 to 100 km/h in as little as 4.8 seconds, with a top speed of 205 km/h.
Performance and efficiency highlights include:
- 0–100 km/h acceleration: 7.9 s, 8.3 s, or 4.8 s
- Combined system designed for both efficiency and dynamic response
- Optimized low state-of-charge fuel consumption
Hongqi HS6 PHEV battery, range, and charging capability
The Hongqi HS6 PHEV is equipped with either a 23 kWh or 40 kWh 4C lithium-iron phosphate battery. This setup enables a CLTC-rated electric-only range of up to 248 km and a combined driving range reaching as high as 1,650 km. Under low battery conditions, fuel consumption remains between 5.1 and 5.9 L/100 km.
Charging performance is a key differentiator, with fast charging allowing the battery to replenish from 20% to 80% state of charge in approximately 15 minutes, supporting daily usability and long-distance travel.
Hongqi HS6 PHEV cockpit electronics and assisted driving features
The interior of the Hongqi HS6 PHEV emphasizes digital integration and driver assistance. The cabin features an 8.88-inch digital instrument cluster and a 15.6-inch integrated display for the center console and front passenger. Select variants include the Hongqi HMI 5.0 system powered by a Qualcomm Snapdragon 8295P chipset.
Technology highlights include:
- 30-inch augmented reality head-up display on select trims
- 360-degree panoramic imaging with Transparent Chassis
- Sinan assisted driving solution with all-scenario autopilot support
- Memory parking assist and exit parking assist functions
With its blend of extended electric capability, rapid charging, and high-end software-defined features, the Hongqi HS6 PHEV reflects FAW Hongqi’s strategy to elevate its flagship SUV lineup while addressing evolving expectations in China’s premium electrified vehicle market.
Company Press Release
Click above to visit the official source.
Share: