Quick Takeaways
  • FORVIA HELLA Lighting Kit reduces module weight by 70%
  • New platform delivers approximately 50% higher optical efficiency
  • Series production is scheduled to begin in spring 2027

FORVIA HELLA has introduced a modular LED front lighting platform called Lighting Kit, developed for special vehicles and a broad range of commercial applications. The system targets agricultural and construction machinery, buses, trucks, light commercial vehicles and motorhomes. Based on the established 90 mm module format, the platform is designed to reduce installation space and component weight while improving lighting performance. Compared with its predecessor, the Bi-LED Module Generation 3, the new Lighting Kit offers up to 70% lower weight and approximately 50% higher optical efficiency, representing a substantial change in the module's packaging and optical design.

The new platform also features an installation depth reduced by almost half compared with the previous generation. This more compact configuration gives vehicle manufacturers greater flexibility when integrating front lighting systems alongside other vehicle components, including sensors, electronic equipment and thermal management systems. According to FORVIA HELLA, the Lighting Kit can deliver up to 77% higher light performance, depending on the selected configuration. Series production is scheduled to begin in spring 2027, positioning the platform for future integration into multiple special and commercial vehicle applications.

FORVIA HELLA Lighting Kit uses modular LED architecture

The Lighting Kit incorporates a newly developed optical system based on freeform optics. This technology is designed to combine homogeneous illumination with higher optical efficiency while accommodating the lighting components within a more compact housing. The approach supports the platform's objectives of improving lighting performance and reducing installation requirements without abandoning the established 90 mm module format. Its modular architecture also allows manufacturers to develop different front lighting configurations using a shared underlying platform rather than relying on entirely separate module designs for individual applications.

One of the available configurations is a Bi-LED version that integrates low beam and high beam functions into a single module. FORVIA HELLA also plans to extend the platform with additional lighting and signal functions, as well as customer-specific geometries. These planned expansions are intended to address different vehicle requirements while retaining the benefits of a common modular architecture. By sharing the underlying platform across multiple applications, the system is designed to reduce the need for separate development activities for individual vehicle configurations.

New LED module designed as a replacement for 90 mm halogen units

The Lighting Kit has been developed as a direct replacement for existing 90 mm halogen lighting solutions. It retains the same mounting points and interfaces, allowing original equipment manufacturers (OEMs) to transition to LED technology without modifying their existing installation arrangements. Maintaining compatibility with established mounting configurations can simplify the integration process for vehicle manufacturers seeking to adopt the new lighting technology. This approach also allows the platform to address applications where existing vehicle designs and installation requirements need to be retained.

The platform has homologation for UN, SAE, CCC and Indian standards, supporting its application across multiple international markets. This combination of established mounting compatibility and regulatory homologation provides manufacturers with a lighting solution intended for different vehicle categories and regional requirements. Together with its reduced weight, shallower installation depth and modular architecture, the Lighting Kit is designed to accommodate the varying packaging and integration requirements of agricultural machinery, construction equipment and commercial vehicles. Series production is scheduled to start in spring 2027.

Industry Impact & Outlook

The Lighting Kit highlights the importance of modular lighting architectures in addressing the increasingly complex packaging requirements of modern special and commercial vehicles. Its reduced weight and installation depth could provide OEMs with additional flexibility when accommodating lighting equipment alongside sensors, electronics and thermal management systems. Retaining the established 90 mm mounting points also addresses an important integration consideration for manufacturers transitioning from halogen to LED technology. Furthermore, the shared platform and planned expansion into additional lighting and signal functions offer a common development approach across different vehicle applications. Its scheduled spring 2027 production start will mark the next stage in bringing the platform into series manufacturing.

Frequently Asked Questions

1. What is the FORVIA HELLA Lighting Kit?
The FORVIA HELLA Lighting Kit is a modular LED front lighting platform developed for special and commercial vehicles. Based on the established 90 mm module format, it is designed for agricultural and construction machinery, buses, trucks, light commercial vehicles and motorhomes. The platform combines a newly developed freeform optical system with a compact housing and modular architecture. It aims to improve lighting performance while reducing component weight and installation depth. Its design also supports different front lighting configurations through a shared underlying platform.

2. How much weight and optical efficiency improvement does the Lighting Kit offer?
The Lighting Kit offers up to 70% lower weight and approximately 50% higher optical efficiency compared with the previous Bi-LED Module Generation 3. Its installation depth is also reduced by almost half. Additionally, FORVIA HELLA states that the platform can deliver up to 77% higher light performance, depending on the configuration. These improvements are based on the supplier's comparison with the predecessor module. The three performance figures describe different characteristics and should not be interpreted as interchangeable measurements.

3. Which vehicles are compatible with the new LED lighting platform?
The Lighting Kit is intended for agricultural machinery, construction equipment, buses, trucks, light commercial vehicles and motorhomes. Its modular architecture allows different front lighting configurations to be developed using a shared platform. The system is also designed as a direct replacement for existing 90 mm halogen lighting solutions, retaining their mounting points and interfaces. This compatibility is intended to help OEMs transition to LED technology without modifying existing installation arrangements. Its application across multiple vehicle categories is supported by homologation for several international standards.

4. What lighting functions does the FORVIA HELLA Lighting Kit support?
The Lighting Kit includes a Bi-LED configuration that integrates low beam and high beam functions into a single module. Its optical system uses newly developed freeform optics to provide homogeneous illumination within a compact housing. FORVIA HELLA also plans to expand the platform with additional lighting and signal functions, alongside customer-specific geometries. These planned developments are intended to accommodate different vehicle applications while retaining the shared modular architecture. The company has not specified further individual lighting configurations in the supplied announcement.

5. When will the FORVIA HELLA Lighting Kit enter series production?
Series production of the FORVIA HELLA Lighting Kit is scheduled to begin in spring 2027. The platform is being developed for multiple special and commercial vehicle applications, including agricultural and construction machinery, buses, trucks, light commercial vehicles and motorhomes. Its existing 90 mm mounting compatibility is intended to support integration into vehicle designs that currently use corresponding halogen lighting solutions. The announced production schedule establishes spring 2027 as the planned start of series manufacturing, rather than indicating that commercial production has already begun.

6. Which international standards does the Lighting Kit meet?
The Lighting Kit has homologation for UN, SAE, CCC and Indian standards, supporting its intended application across multiple international markets. These homologations are relevant to OEMs developing vehicles for different regulatory environments. The platform also retains the mounting points and interfaces of existing 90 mm halogen lighting solutions, helping manufacturers adopt LED technology without modifying the established installation arrangements. Together, its homologation coverage and mounting compatibility are intended to support its use across different vehicle applications and markets.

Official Disclosures, Public Data & GAI Analysis

Click above to visit the official source.

Discussion

Join the conversation.

Share: