- Honda is recalling more than 1 million vehicles in the U.S. and Canada over rear subframe corrosion concerns.
- Affected vehicles may require inspection, reinforcement, repair, or replacement of rear subframe components.
Honda has announced a major safety recall affecting more than one million vehicles across North America after identifying a potential rear subframe corrosion issue that could compromise suspension mounting points. The campaign covers selected vehicle models sold in both the United States and Canada and is intended to address the risk of rear suspension component failure resulting from corrosion-related deterioration in affected areas.
The recall involves approximately 1,016,774 vehicles, including the 2016–2022 Honda Pilot, 2017–2023 Honda Ridgeline, 2019–2023 Honda Passport, and 2014–2020 Acura MDX. According to the company, 880,514 vehicles are located in the northeastern and midwestern regions of the United States, while an additional 136,260 vehicles are affected in Canada.
Honda stated that the issue originates from rear subframes produced with coating specifications that did not meet intended requirements. The improper coating may lead to inadequate paint adhesion around the arm bracket weld area, increasing the likelihood of premature paint peeling. Over time, exposure to moisture and road contaminants can accelerate corrosion, particularly in areas where de-icing salts are commonly applied during winter road maintenance operations.
The company noted that the affected rear subframes were supplied by F&P Georgia in the United States. Corrosion developing in critical mounting locations may adversely affect suspension attachment points, potentially increasing the risk of rear suspension component failure if left unaddressed.
Affected Regions Covered Under the Recall
The recall applies to vehicles registered in specific U.S. jurisdictions where environmental conditions can contribute to accelerated corrosion. These include Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin.
Recall Scope by Market
| Market | Affected Vehicles |
|---|---|
| United States | 880,514 |
| Canada | 136,260 |
| Total | 1,016,774 |
Vehicle owners will begin receiving notification letters starting July 7. Authorized Honda and Acura dealerships will inspect the rear subframe condition and install a reinforcement kit where required. Depending on inspection findings, dealers may also repair or replace affected rear subframe components to restore structural integrity and ensure continued vehicle safety performance.
Frequently Asked Questions
Why is Honda recalling these vehicles?
The recall was initiated because certain rear subframes may experience premature corrosion due to improper coating specifications during manufacturing. Insufficient paint adhesion can lead to paint peeling and accelerated corrosion, particularly in regions that frequently use de-icing salt on roads. If corrosion progresses, it could affect suspension mounting points and increase the risk of rear suspension component failure. Honda is conducting inspections and implementing corrective actions to address the issue and maintain vehicle safety.
What will dealers do during the recall repair process?
Authorized Honda and Acura dealers will inspect the rear subframe to assess the extent of any corrosion-related damage. Based on the inspection results, technicians will install a rear subframe reinforcement kit and perform additional repairs if necessary. In cases where damage is more significant, affected subframe components may be replaced. These measures are intended to restore proper structural performance and reduce the risk associated with suspension mounting point deterioration.
Click above to visit the official source.