- Freudenberg Sealing Technologies develops an EV busbar sealing solution.
- Elastomers accommodate thermal expansion, vibration, and manufacturing tolerances.
- Testing covers heat aging, temperature cycling, and thermal shock.
Freudenberg Sealing Technologies Develops High-Voltage Busbar Sealing Solution
Freudenberg Sealing Technologies, a business group of Freudenberg SE, has developed a bonding solution for high-voltage busbar feedthroughs in electric vehicles (EVs). The technology replaces conventional epoxy potting compounds with elastomers chemically bonded to copper or aluminum busbars. Its primary purpose is to address microcracking associated with thermal expansion and stress concentration at the corners of rectangular busbars. These cracks can allow oil or coolant to enter areas that must remain dry, potentially creating leakage currents or short circuits. By using an elastic sealing material bonded to the metal surface, the solution is designed to accommodate movement and mechanical stress while maintaining the required separation between wet and dry areas.
How the Elastomer Bonding Technology Works
The sealing system begins with a metal surface that receives primer pretreatment before an elastomer layer is applied. The coated busbar is then overmolded with thermoplastic or installed in the housing, depending on the application. Unlike conventional rigid epoxy potting compounds, the elastomer-based solution is designed to accommodate thermal expansion, manufacturing tolerances, misalignment, and vibration. These characteristics address several conditions that can affect the integrity of high-voltage electrical feedthroughs during operation. The technology can be adapted to different operating environments through the selection of suitable elastomer materials, allowing the sealing system to address application-specific temperature and fluid exposure requirements without changing its fundamental bonding approach.
Elastomer Materials and Operating Temperature Range
The material selection includes several elastomer families: fluorocarbon rubber (FKM), ethylene acrylic rubber (AEM), acrylic rubber (ACM), hydrogenated nitrile butadiene rubber (HNBR), nitrile butadiene rubber (NBR), and ethylene propylene diene monomer rubber (EPDM). Depending on the application, these materials cover operating temperatures from minus 40 degrees Celsius to above 200 degrees Celsius. This range enables the company to tailor sealing materials to different thermal conditions rather than rely on a single compound for every application. The choice of elastomer is relevant to components exposed to temperature changes, oils, or refrigerants, although the appropriate material depends on the specific operating conditions and application requirements.
Material and Component Testing Standards
Freudenberg Sealing Technologies has also developed a testing program covering materials and finished components. The program is based on DIN EN 60068-2-2 for heat aging, DIN EN 60068-2-14 for temperature cycling, and LV 214 for combined thermal shock. Applications involving oil or refrigerants are also included in the testing scope. By addressing both material behavior and finished-component performance, the program evaluates the sealing solution under conditions relevant to its intended use. The specified standards provide the framework for assessing thermal durability and temperature-related stresses, while testing involving oils or refrigerants addresses additional application environments in which fluid compatibility and seal integrity matter.
Applications Across Electric Vehicle and Electrical Systems
The technology was initially developed for busbar feedthroughs in oil-cooled electric motors, inverters, and immersion-cooled batteries. Its applications have since expanded to air-conditioning compressors, electric pumps, multi-pin connectors, and other electrical applications. This broader use reflects the relevance of elastomer bonding wherever electrical connections must remain protected from surrounding fluids and environmental stresses. The underlying approach combines a chemically bonded elastomer layer with an application-specific installation method, offering a way to accommodate movement while maintaining the separation required by the component design. The range of identified applications extends beyond the original electric powertrain use cases to other systems that incorporate electrical connections and sealing requirements.
Industry Impact & Outlook
The development addresses an important engineering challenge in electric vehicles: maintaining reliable insulation and fluid separation around high-voltage electrical connections exposed to thermal and mechanical stresses. An elastomer-based bonding approach may help component designers manage the risk of microcracking associated with rigid sealing materials, while the range of available compounds provides flexibility across different operating environments. The testing program also supports evaluation of material and component performance under specified thermal conditions and fluid exposure. Potentially relevant stakeholders include electric motor, inverter, battery, compressor, pump, and connector manufacturers. Further adoption will depend on application-specific performance requirements and validation, including the suitability of the selected material for the intended temperature, fluid, and mechanical conditions.
Frequently Asked Questions
What has Freudenberg Sealing Technologies developed for electric vehicles?
Freudenberg Sealing Technologies has developed an elastomer bonding solution for high-voltage busbar feedthroughs in electric vehicles, replacing conventional epoxy potting compounds. The technology chemically bonds elastomers to copper or aluminum busbars to address microcracking associated with thermal expansion and stress concentration. Such cracks can allow oil or coolant to enter areas that must remain dry, potentially causing leakage currents or short circuits. The solution uses a primer-pretreated metal surface, an elastomer coating, and either thermoplastic overmolding or installation in the housing, depending on the application.
Which elastomer materials are used in the busbar sealing solution?
The solution can use several elastomer materials selected according to the requirements of the specific application. These include FKM, AEM, ACM, HNBR, NBR, and EPDM. The stated temperature coverage ranges from minus 40 degrees Celsius to above 200 degrees Celsius, depending on the material and application. The sealing structure is designed to accommodate thermal expansion, manufacturing tolerances, misalignment, and vibration. The selection of a particular elastomer depends on the intended operating conditions, including temperature and exposure to fluids such as oils or refrigerants.
Which testing standards support the sealing technology?
The company's testing program covers materials and finished components and is based on three specified standards addressing thermal performance. DIN EN 60068-2-2 covers heat aging, while DIN EN 60068-2-14 addresses temperature cycling. LV 214 is used for combined thermal shock. The program also includes applications involving oils or refrigerants. These evaluations address conditions relevant to the sealing system's intended operating environment. The identified standards and application testing form part of the company's approach to assessing the materials and finished components, rather than relying solely on the properties of the elastomer material in isolation.
Where can the elastomer bonding technology be applied?
The technology was initially developed for busbar feedthroughs in oil-cooled electric motors, inverters, and immersion-cooled batteries. Its applications have expanded to include air-conditioning compressors, electric pumps, multi-pin connectors, and other electrical applications. These components can have different operating environments and sealing requirements, making material selection and application-specific validation important. The bonding approach is intended to accommodate thermal expansion and mechanical stresses while helping maintain separation between areas that must remain dry and surrounding fluids. The precise elastomer and installation method depend on the component and its intended operating conditions.
Click above to visit the official source.
Discussion
Join the conversation.